GHARiENi 601 Скачать руководство пользователя страница 16

Страница: 16 / 82

Before setting up the 601, make sure that there is enough space for the 601
so that it does not meet anything even when it is fully extended.

WARNING!

If the treatment table is equipped with the heating

system,

the cables are located between the upholstery and the

underframe.

The upholstery may only be removed by persons

authorized by the Gharieni Group GmbH.

6.2 Transport

Always consider the dimensions of the 601 when transporting.

Transporting the 601 can sometimes be severely affected by unsuitable ambient.

Such unsuitable ambient conditions are, e.g., narrow doors, narrow corners
behind doors, narrow corridors, narrow stairways, spiral staircases etc.

Weight of the 601 is at least approx. 120 kg; the length ranges from 180 cm to

200 cm and width including upholstery; this limits maneuverability of the 601.

❖

The best way to carry the bed is to lift it by the base only, one person at each

corner of the base. Remove the transport lock (2 straps / if available) before

putting the bed into operation.

❖

Never lift the 601 by the seat / lying surface or the armrests during transport.

Otherwise you can seriously damage the 601.

❖

The 601 can be

carefully

moved or transported

on flat surfaces

using the

castors. Do not use the castors on uneven surfaces.

NOTICE!

Always secure the optional castors immediately by locking

them. RISK OF INJURY! RISK OF ROLLING AWAY!

DANGER!

Never roll the 601 over the power cable. Otherwise you

can permanently damage the power cable.

DANGER!

The power cable must not be under the adjustable stands

or under the castors of the 601. Otherwise they can crush the power
cable or cause permanent damage. RISK OF ELECTRIC SHOCK!

WARNING!

Do not move the 601 on the castors while there are

people or loads on the 601. Otherwise you will damage the construction
or substructure of the 601 and the castors. RISK OF INJURY! RISK OF
DAMAGE

Optional accessory

Содержание 601



















































































Результаты поиска

Содержание 601

Отзывы:

Похожие инструкции для 601

Бренды по названию

Популярные бренды

GHARiENi 601, Инструкция по эксплуатации

Результаты поиска

Содержание 601

Отзывы:

Похожие инструкции для 601

Бренды по названию

Популярные бренды