gfm PeakStore5, Руководство пользователя

Страница: 10 / 37

8 PeakStore5 Manual Version 3.0
2.
Delivery components
The following components belongs to the standard scope of delivery:
•
Data collection system PeakStore5 in the variants PeakStore504 (4-channel),
PeakStore508 (8-channel) or PeakStore512 (12-channel)
•
Installation-CD Software Peakanalyzer Manager
•
CD with license and calibration data of the PeakStore5
•
PeakStore5 Manual
•
Power line 230 V AC
•
Power supply unit AC/DC
•
Bluetooth keyboard
Optionally the following components can be delivered:
•
Accelerometer IMI608A11 (100 mV / g)
•
Accelerometer IMI601A02 (500 mV / g)
•
Optical speed sensor
•
Mounting for optical speed sensor
•
Self-adhesive reflective tape
•
Hard-top case for the PeakStore5 and sensors
•
Extension for the remote control
•
Shoulder strap and mounting for the PeakStore5
•
Additional sensor supply (24 V)
•
Cable for protected earth connection
•
Replacement accumulator
3.
Control Elements
Picture 2: Function keys front bottom (Source: Winmate M101 Manual)
The measurement can be started via the function key Fn1 on the bottom front side. If a config-
uration with an undefined measurement time is activated, this function key can also be used
to stop the measurement. If the PeakStore5 is in Standby mode, the settling process is first
started. The actual measurement will start immediately after the settling process is finished.
By pressing the Fn1 key longer, the touch mode can be switched. There are modes for the
stylus, hand and a rain mode available. The mode can be switched depending on the environ-
mental conditions.
The home key displays the tablet module configuration of optional devices on the right side of
the display. Among others, the coupling of the measurement device to the tablet can be
switched off completely (see 5). Via the power key the tablet can be switched off or shut down.