gfm GF-Primo Dolly, Инструкция по эксплуатации и правила безопасности

Страница: 87 / 92

86
14.4
Operational Guidelines for the GF- Primo Jib
When operating the GF-Primo Jib observe the following guidelines as well as the
guidelines on page 3 & 5:
1. Know the precise weight that will be placed on the platform i.e. person,
camera and accessories. Do not exceed the maximum payloads
o
Jib-Operation with High/Low Rig

m
max
= 200kg / 440lbs
o
Jib-Operation without High/Low Rig

m
max
= 250kg / 550lbs
2. When the platform is empty, do not have more than 3 counterweights attached
to the weight carrier.
Tip:
In general the counterweights and platform load should be evenly
applied e.g. do not load all the weights in one go or do not place the
camera or operators on the platform in one go. Proceed step by step in
a balanced procedure.
3. Drive the platform to the lowest position and proceed to mount the riser,
camera, seat arms and seat on the platform. Simultaneously load the
respective amount of counterweights.
Attention: When taking position on the platform use caution and
make no sudden or abrupt movements. Depending on the
position of the platform i.e. high, middle or low, a ladder or
rostrum should be used to assist the operator onto the
platform.
Do not climb onto the jib!!
A second person should only take place on the platform
when the first person and load are fully balanced.
4. Depending on the total payload to be lifted on the platform the respective
amount of counterweight can now be added. E.g. 109kg on platform requires
108kg (9 weights @ 12kg) in counterweights.
Please follow the following weight scale: