gfm GF-Primo Dolly, Инструкция по эксплуатации и правила безопасности

Страница: 73 / 92

72
Connector
Pins
13 Trouble Shooting
The following describes some possible errors and the solutions to correct the errors.
Error:
Dolly and HCU are not functioning in wireless mode
Solution:
Check
o
Are the HCU and column equipped with wireless modules?
o
Is the emergency OFF Switch inserted into the off position? If so, twist clockwise to
deactivate.
o
If the HCU battery is in place. The wireless mode does not work without battery.
o
Are the HCU and electronic synchronized? If not, connect via the HCU cable.
o
Are both the HCU and electronic sending and receiving on the same channel?
Error:
In wireless mode there is a disturbance in the movement of the column.
Solution:
Select the next or any other channel e.g. 4.
If this doe
sn’t help, change to cable operation.
Check the battery voltage with a loaded column. Should the voltage fall below 19V replace or charge
the batteries.
Check the motor temperature. In general terms the following can be said about the electro-motor:
The hotter the motor becomes, the higher the performance loss. Should the motor reach a
temperature of 60°C the column will shut down automatically to avoid permanent damage. However, it
is suggested to avoid use of the column when the temperature exceeds 50°C.