GF MSA 330, Инструкция по эксплуатации

Страница: 34 / 124

6 Administrator information Operating Manual MSA 330 / MSA 340
30
6 Administrator information
The electro-fusion (EF) unit can be configured at different levels:
• In depth for setti ng the workflow to be used by the operator
•
For minimal aspects, during the normal operations
For this reason the machine, at power on, is programmed to show the
minimal set of menus, including just a few basic options.
If the EF unit needs to enable additional options, a machine responsible
has to access the full set of menus. This is possible via a specific barcode,
which should not be replicated or given to generic users.
The bar code to be used is printed on a plastified sheet which is part of
the technical documentation and shall not be lost.
As soon as the EF unit is powered-on and the initial banner is shown (see
the picture as example of how it looks like), the special barcode’s
proprietary has to let the machine to read it (by optical pen or scanner).
MSA 330
S/N: S160B5911011
SW vers. :
1.02
Next revision: 05/11
The machine accepts the barcode only when the banner above is
shown, so just for a few seconds.
If the barcode is recognized, the EF unit will acknowledge the operation
with the following message
ADMINISTRATOR MENU
ENABLED
the complete menu set (both for DATA RETRIEVAL and MACHINE SETUP) is
available. Then the machine responsible can change the configuration
to suit his needs, as described in the
Configuration Settings and in the
Data Management chapters of the Operating Manual.
The full access of hidden menus persists till the machine is switched off.