GF MSA 330, Инструкция по эксплуатации

Страница: 16 / 124

2 Fusion process Operating Manual MSA 330 / MSA 340
12
The message above is an advice, to inform the user the fusion process
may not be concluded successfully due to internal temperature of the
machine. Since the fittings have different curves depending on
manufacturer, size, technology parameters, it does not prevent the user
for going forward, if he is sure, based on his experience, the fitting can
be welded.
2.7 Fusion preparation
To use the FUSION PREPARATION function, this option has to
be enabled in the configuration menu (see ‘Configuration’
chapter).
PIPE ENDS PREPARED?
(peel, clean, Align)
01.01.08 15:20 Esc OK
If FUSION PREPARATION alert is activated, the display shows a message
which requires confirming the pipes preparation (scraping, cleaning, and
alignment) has been done. If it has been executed, press START/OK ( I )
to start the fusion process.
The preparation of the pipes according to guidelines
(scraping, cleaning, and alignment) are essential to ensure
the quality of the welding.
Advise