Slimdrive SLT product family
16
Installation
3
3
2
30 mm
X
Thread the wire rope into the clamping piece (3) and pull through.
X
Position the clamping piece (3) on the track (approx. 30 mm distance from the suspension part (2)) and
clamp in position.
X
Tighten the wire rope by hand and secure in the clamping piece (3) (screws from underneath).
4
2 mm
3
X
Position the tensioning piece (4) approx. 2 mm away from the clamping piece (3) and clamp tightly.
X
Undo the fixing screws of the clamping piece (3) while at the same time, with the help of a screwdriver,
push the clamping piece (3) to the left and tighten the wire rope slightly.
X
Tighten the clamping piece (3) on the track.
X
Cut off protruding end of the wire rope. Length of the remaining overhang approx. 20 mm.
X
Hook inner moving leaf in place and use lock nuts to pre-secure moving leaf.
X
Thread the wire rope into the connecting arm
(7), but do not clamp yet.
To reach the connecting arm, the moving
leaves must be placed in the closed position.
The connecting arm is then accessible from
the outside.