Slimdrive SLT product family
10
Installation
Clamping the track with clamping strips
WARNING!
Risk of injury!
Unsecured components may fall when under load.
X
Remove the cap with side plate.
The track (3) is clamped to the mounting profile (1) using clamping strips (2) so that the track (3) is attached so as
to be prevented from twisting.
X
Slide 7 clamping strips (2) between the
mounting profile (1) and the track (3).
Post/rail version:
X
Position inner 5 clamping strips (2) at the
level of the inner posts and position others
between them.
Wall and ceiling installation:
X
Mount the cap with side plate (see pre-in-
stallation instructions).
X
Position one clamping strip (2) on the
exterior of each mounting profile/track
as follows:
à
Left at the transition between the cap
and track,
à
Right at an appropriate distance from the
end of the track.
Mounting the cover
X
Disconnect the cover (2) at the disconnection
point (3) from the residual piece (4).
X
Dispose of the residual piece.
X
If necessary. slide the cover (2) in to the
mounting profile (1).