Slimdrive SLT product family
14
Installation
2-leaf
Installing the connecting arm and short driver:
For drive SLT-FR 2-leaf, right, an angled driver, short (8) is mounted.
X
Use 2 hexagon screws (7) and intermediate
plate (9) to screw the short driver (8) to the
inner moving leaf (torque 15 Nm).
X
Clamp the connecting arm (3) in place using
2 setscrews (4) (torque 3 Nm).
5.4.3 Fitting the moving leaves
WARNING!
Risk of injury caused by moving leaf falling over!
The moving leaves are very heavy.
X
At least 2 people should work together to set up the moving leaf.
WARNING!
Risk of injury due to glass breakage.
X
At least 2 people should work together to set up the moving leaf.
X
Remove the roller carriage from the transport
locking device, push the stop buffer outwards.
X
Hang door suspension plates (2) from the front
into the suspension bolts of two roller carriages.
X
Secure the moving leaf using lock nuts (1).
Do
not
tighten the lock nuts (1) yet.