Slimdrive SLT product family
15
Installation
5.4.4 Installing the wire rope
Overview
(4-leaf shown)
1
Rope pulley, short
2
Suspension piece
3
Clamping piece
4
Tensioning piece
5
Wire rope
6
Rope pulley, long
7
Connecting arm
X
Push outer moving leaf into open position.
approx.
20 mm
6
2
5
2
X
Position suspension piece (2) on the track approx 20 mm from the centre axis of the long rope pulley (6)
and clamp in position.
X
Thread in the wire rope (5) from right to left into the suspension piece (2) and pull through until the nipple
contacts.
6
1
X
Route the wire rope around the long rope pulley (6) of the moving leaf.
X
Route the wire rope around the short rope pulley (1) of the moving leaf.