Powerturn
10
Description
3.5 Door in normal operation
In normal operation, the door is automatically opened and closed.
When Powerturn IS/TS is used, only the active leaf opens automatically. The passive leaf has to be opened manually.
What happens?
What does the door do?
An activation device (push button, switch or movement
detector) is triggered.
Door opens, waits the hold-open time and then closes.
Closing safety sensor (SIS) is triggered when the door is
open (e.g. light switch).
Door remains open.
Closing safety sensor (SIS) is triggered while the door is
closing.
The door immediately opens again or stops depending on
the parameter setting.
Opening safety sensor (SIO) is triggered while door is
opening.
The door stops and remains in position until the end of
activation (door opens) or until the end of the hold-open
time (door closes).
Opening safety sensor (SIO) is triggered when the door is
closed.
Door remains closed.
A person moves toward the opened door and a movement
detector is activated.
Door remains open.
A person moves toward the closing door and a movement
detector is activated.
Door reopens immediately.
Door contacts an obstruction when opening. The opening
safety sensor has not been activated.
Door stops, waits and attempts again to move to the open
position at a reduced speed.
Then the door closes again.
Door contacts an obstruction when closing. The closing
safety sensor has not been activated.
Door reopens immediately, waits the hold-open time and
then closes at a reduced speed.
When door closer mode is used with the closing safety
sensor deactivated, the drive presses against the obstacle
with the force set.
Additional door functions
Which switch/button?
What does the switch/button do?
Emergency stop button
The door stops immediately (in every mode of operation)
and holds the position until the emergency stop button is
unlocked.
Key switch of the display programme switch
If a key-operated switch is connected to the display pro-
gramme switch, the operation of the display programme
switch can be locked or released with it.
Activation device authorised (KB) (e.g. outside key switch) Door opens once and closes after the hold-open time. The
set mode of operation is retained.
Activation device with radio board
Door opens once and closes after the hold-open time. The
set mode of operation is retained.
If the key in radio channel 1 is pressed for longer than 5 s,
the controller changes to the DO mode of operation. After
the key has been pressed again for at least 5 s, the control
changes back to the AU mode of operation.
Switch function
The automated door can be activated using the switch
function.
Normal switch function:
à
Switch contact opens the door and the door remains in
the open position.
à
Switch contact closes the door.
Switch function with hold-open time:
à
Switch contact opens the door.
à
Switch contact closes the door or the door starts to
close after the hold-open time.
