Gewiss JOINON, Инструкция по установке и эксплуатации

Страница: 73 / 341

73
Charging process Gewiss
DELETING AN RFID CARD FROM THE LOCAL LIST
# Action to be carried out RGB LED status Words on the display
1
Swipe the MASTER key across the RFID reader to access
the storage menu
Fixed green
*SAVING*
SWIPE THE CARDS
2
Swipe the MASTER key across the RFID reader until you reach
the required section
Fixed green
*DELETION*
SWIPE THE CARDS
3 Swipe the RFID card that you want to delete across the reader Fixed green
RECOGNITION
*PLEASE WAIT*
4
To quit the RIFD card storage menu, swipe the MASTER key across
the RFID reader until the standard message appears
Fixed green
SWIPE THE CARD
TO RECHARGE
B. ADDING A BATCH OF RFID CARDS TO THE LOCAL LIST.
If numerous RFID cards need to be added to the local list of the charging station, or if this task must be carried out on a number of
stations, it can be speeded up by creating a .csv file to be saved on the microSD inside the station. Proceed as follows:
# Action to be carried out
1 Disconnect the power supply to the charging station.
2 Open the front door and remove the microSD on the electronic board (slot on the upper left side).
3 Insert the microSD in the computer (it might be necessary to use adapters).
4 Create a .csv file with the name RFID.csv in the main directory.
5
In this file, create the data structure following this pattern:
UID1;
UID2;
UID3.
6 After creating the structure and saving the file in the microSD, put the microSD back in the electronic board.
7 Power the charging station again.
8
If the procedure has been completed without errors, the station will import the file and the data it contains.
The message CONFIGURATION COMPLETED will appear on the display. At the end of the import procedure,
the file will be renamed RFID_old.csv on the microSD.
9 Check the import has been completed correctly by swiping one of the cards from the newly imported local list.
To enable a recharging session:
# Action to be carried out RGB LED status Words on the display
1 Check the display to make sure there are no charging station errors Fixed green
SWIPE THE CARD
TO RECHARGE
2
Swipe an RFID card across the reader, near the graphic symbol
Fixed green
CARD ENABLED
*PLEASE WAIT*
3
If the card is recognised (i.e. it is in the local list), the station will
release both type 2 socket-outlets and the client can choose the one
he/she prefers
Flashing green
CHARGING ENABLED
CONNECT THE CABLE
4
Insert the recharging plug in the required socket-outlet of the station,
and in the vehicle
Flashing green
CHARGING ENABLED
CONNECT THE CABLE
5
Once the connection has been made, the station checks the CP and
PP signals to make sure the session can be started
Fixed green PLEASE WAIT
6
Once the CP and PP signals have been checked, the recharging
station will mechanically block the plug in the socket-outlet.
The recharging session begins
Flashing blue
RECHARGE IN PROGRESS
Ts=0000 Tc=0000
RECHARGE IN PROGRESS
kW=0000 kWh=0000
7.55.4.515.2 - Installation and Operation Manual Installation and Operation Manual
IT
EN
FR
ES
DE
RO
HU
NL