USER INSTRUCTIONS
14
Setting the temperature measurement unit
When the °C or °F temperature symbol begins flashing,
select the temperature measurement unit by means of the
button keys. To confirm your choice and move on to
the next parameter, press the
button key within 30
seconds.
Returning to the main page
Use the
or
button key to set the main page that the
device must automatically visualise at the end of a period
of inactivity by the user (OFF = function disabled; THER =
main thermostat page; P01, P02, P03, P04 = pages relating
to the remote elements, if these are enabled; Hr = pages
relating to humidity, if enabled).
If this function is enabled, press the
button key to access
the page for setting the duration of the inactivity period. Use
the
or
button key to set the gap (5 - 120 seconds). To
confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
Back-lighting colour
Use the
or
button key to modify the colour of the
display back-lighting. To confirm your choice and move on
to the next parameter, press the
button key within 30
seconds.
NB: if red/blue is chosen, the thermostat background will be
white during the idle phase (heating and cooling valves
deactivated) of normal operation, turning red when the
heating system is activated or blue when the cooling system
is activated.
Icons theme
Use the
or
button key to modify the colour themes for
representing the various icons shown on the display (MONO
= single-colour theme; TH1, TH2, TH3, TH4, TH5 = colour
themes) when the backlighting is active. The screen is only
visible if the back-lighting colour is white. To confirm your
choice and move on to the next parameter, press the
button key within 30 seconds.
