USER INSTRUCTIONS
10
Thermostat operation statuses
The thermostat has two distinct operation statuses:
- Normal operation
- Parameter setting
When it is switched on, the thermostat goes into “normal operation” status. Using the
button key, you can switch from one status to the other (the switchover from
“parameter setting” status to “normal operation” status also comes about automatically,
30 seconds after the last pressure on the button keys).
Normal operation
In normal operation conditions, the pages containing information about the thermostat
are shown, along with the pages relating to any remote elements (e.g. KNX temperature
adjustment probes) that may be present.
Choosing the page you want to see
To access the screen listing the pages that can be viewed
(relating to the thermostat, humidity and remote elements),
keep the
button key pressed.
Use the
or
button key to scroll through the sequence
(if there are no remote elements - P01, P02, P03, P04 - and
no humidity section, the main thermostat page will be
displayed). To confirm a page, press the
button key or
wait for the 30-second time-out period to elapse.
Pages relating to the thermostat (control type: HVAC)
Choosing the HVAC mode (pre-comfort, comfort,
economy or OFF)
If the visible page relates to the thermostat, and the control
type has been set by ETS in HVAC mode, press the
button
key to select the required HVAC mode (
,
,
or
).
Each time the
button key is pressed, the setpoint of the
selected HVAC mode is shown for a moment.
If the device is configured as a Slave, no local modification
of the HVAC mode is allowed; manual HVAC switch-off (OFF)
is permitted if this function is enabled via ETS.
