USER INSTRUCTIONS
E
N
G
L
I
S
H
11
Forcing the setpoint manually
If the displayed page relates to the thermostat and any
HVAC mode other than OFF is active, press the
or
button key to temporarily modify the setpoint of the active
HVAC mode (within the adjustment limits set via ETS), then
confirm with the
button key or wait for the 5-second
time-out period to elapse. The use of forcing is indicated by
the flashing of the , , symbols. It remains active until
the active HVAC mode is modified
Pages relating to the thermostat (control type: setpoint)
Forcing the setpoint manually
If the visible page relates to the thermostat, and the control
type has been set by ETS in setpoint mode, press the
or
button key to temporarily force the setpoint itself (within
the adjustment limits set via ETS).
The forcing remains active until the operating setpoint is
modified, or until the thermostat is manually switched off.
Manual switch-off
If the visible page relates to the thermostat, and the control
type has been set by ETS in setpoint mode, press the
button key to switch the device off manually (
).
Press the
button key again to reactivate the device; when
the button key is pressed, the active setpoint will be shown
for a few moments. This operation is only possible if the
function is enabled via ETS.
Pages relating to the thermostat (control type: HVAC or setpoint)
Choosing the fan coil speed
If the displayed page relates to the thermostat, and the
control type is setpoint or any HVAC mode other than OFF,
press the
or
button key simultaneously to access
the selection page (the control algorithm of heating/cooling
operation must be set on “fan coil” from ETS).
Use the
or
button key to select the required fan coil
setting ( ,
,
or
), then confirm with the
button
key or wait for the 30-second time-out period to elapse.
