Gewiss Chorus GW 10 763, Руководство пользователя

Страница: 41 / 152

USER INSTRUCTIONS
41
E
N
G
L
I
S
H
It is possible to set the following parameters:
According to the operation type, it is now possible to sequentially modify:
To scroll the sequence, confirming the values displayed on the screen, press the key
until you reach the parameter you want to change.
Press the SET key again to exit the parameter setting procedure or it will exit
automatically after a 30" time-out.
It is necessary to perform both sequences to set the heating and air-conditioning
parameters (in the second sequence it is possible to confirm the parameters which are
the same, and just change the specific ones).
Heating Air conditioning
P01
heat
- Set Point P01
cond
- Set Point
P02
heat
- Set Point P02
cond
- Set Point
P03
heat
- Set Point P03
cond
- Set Point
P04
heat
- Set Point T
FROSTPROTECT
P04
cond
- Set Point T
HIGH TEMPERATURE PROTECTION
P05 - Control logic P05 - Control logic
P06 - Cycle time P06 - Cycle time
P07 - PWM regulation
differential value
P07 - PWM regulation
differential value
P08 - ON/OFF regulation
differential value
P08 - ON/OFF regulation
differential value
P09 - Control mode P09 - Control mode
P10 - Enable remote control P10 - Enable remote control
Operation type (heating/air conditioning)
Day of the week
Hour
Minutes
Temperature unit of measurement