GEViCAM GP-151400, Руководство по эксплуатации

Страница: 36 / 40

36
36
9. Pleora Document Lists
The documents listed here are included in the
Pleora SDK software ver. 2.3.0. These are helpful
tools to supplement this manual. When you unzip
and install the SDK software, it contains a docu-
mentation file among other Pleora Technologies
files in the Program file of your computer. Look for
iPort and E-Bus documentation files. You will see
files shown in Fig.60. We suggest to keep several
important documents for your reference. They are;
1. iPort Software Coyote
2. Introduction
IP Engine
3. E-Bus Introduction Quick Start (e-Bus file)
4. iPort Instruction Quick Start
5. What’s
New
6. Reference. PLC
7. Troubleshooting Guide
The SDK reference manual is provided in two
forms. Visual Studio 6.0 base (Visual C++), and
Visual Basic base. We suggest to keep Visual
C++ version as it is the most recent document and improved version.
9.1 iPort Coyote
About Coyote
Menus and Tabs
Main Menu Connection tab Acquisition tab
Image Saving tab Diagnostic tab Coyote dialogs
Configuration dialog Connection Flags dialog Custom Tap Reconstruction
GenIcam XML Selection IP Engine Selection Multi-Target Configuration
Network Stack Port selection Options dialog PLC Control Bits dialog
Port Configuration dialog Pulse Generators dialog Save Device configuration to flash
Select Camera dialog Serial Port Configuration Set IP Engine IP Address
9.2 iPort IP Engine Instruction
Introduction
Overview of iPort IP Engines
iPort Connectivity Solution Applications Programmable Logic Controller
Network Configurations Acquisition features iPort High-performance Driver
iPort Universal Filter Driver Standard NIC Drivers
PC Requirements Ethernet Switch Requirements Power Requirements
Coyote Application
File Menu Device Menu Tools Menu
Display Menu Help Menu Common Buttons
Device Information IP Information Heartbeat and Multi-Target Modes
Serial Port Link Time-Outs and Packets Device Actions
Acquisition control Display Acquisition Information
Frame Save
iPort Common Controls
Network Device Finder Set IP Address Dialog Set Name Dialog
Select Camera Dialog Camera Configuration Dialog Grabber Settings
Image Settings Pixel type Tap Reconstruction
Device Features Grabber Features GPIO Control Bits
RGB Filter Port Communication
GEViCAM Inc
Note: This Pleora document is intended to the Pleora iPort modules. Some may not be applicable to GEVi-
CAM products.
Fig. 60