manualshive.com logo in svg

Getinge CS100, Краткое руководство пользователя, Страница: 7 / 34

Поделиться
Скачать
Getinge CS100 Скачать руководство пользователя страница 7

 

7 CS100/CS300 BATTERY OPERATION

Viewing Battery Status on Front Panel

Battery Status

IABP ON/OFF 
This is the ON/OFF switch for the IABP console and monitor module. Operation of 
this switch does not affect the status of the internal battery charger.
Battery Charging LED 
This indicator has three states:
• It illuminates continuously when the internal batteries are fully charged
• The LED indicator flashes when the internal batteries are charging
•  CS300: It is not illuminated when system is using the battery as a power source, or 

when AC power is not available to the system, or when the system battery is faulty. 
 CS100: The Battery In Use status message and the Battery Indicator are displayed 
when the system is operating from the internal rechargeable battery.

IABP ON/OFF

CS300

Automated Counterpulsation

I N T E L L I S E N S E  T E C H N O L O G Y

Front Panel

Battery 

Charging LED

FOR CS100: 
CAUTION:

  

The internal batteries are charging only when the  

AC Mains plug is connected to an active AC Mains source,  
the AC Mains switch is “On”, and the battery charging status  
LED is illuminated. This charging condition must be maintained  
even when the system is not in use. Note that 18 hours of charging  
is required to fully charge the batteries.

FOR CS300: 
CAUTION: The system should be configured to charge the  
internal batteries whenever AC power is available. Hence, keep the 
system connected to a live AC receptacle with the Mains On/Off 
switch in the “On“ position. If the system is to be stored for extensive 
periods of time, or in ambient temperatures above the operating 
range, see the Battery Section of the User Maintenance Chapter in 
the Operating Instructions for additional information.
CAUTION: When AC power operation is intended, insure that the 
system is plugged into AC mains, that the mains switch is in the “On” 
position, and that the Battery in Use informational message in  
NOT displayed.

It is extremely important to know the status of the IABP batteries at all times, as the status of the internal batteries affects the performance and  
operation of the unit. There are two ways to determine the battery status, on the front panel and on the display screen.

Содержание CS100



































Отзывы:

Нет отзывов