Gestetner A265, Руководство по обслуживанию

Страница: 210 / 855

SERVICE PROGRAM MODE
A265/A267 4-22 SM
Mode No.
Class
1 and 2
Class
3
Function Settings
Adjusts the toner supply motor on time for
sensor supply mode.
This SP is effective only when SP2-921 is
“0” or “1”.
2-922*
Toner Supply Time
Increasing this value increases the toner
supply motor on time. So, use a high value if
the user tends to make lots of copies that
have a high proportion of black.
0.1 ~ 5.0
0.1 s/step
0.6 s
Adjusts the toner supply motor on time
during recovery from toner near-end/end.
This SP is effective only when SP2-921 is
“0”, “1”, or “2”.
2-923*
Toner Recovery
Time
Note that toner recovery is done in a 3-
second cycle. So, the input value should be
a multiple of 3 (e.g. 3, 6 ,9). See “Toner
Density Control” for more details,Section
2.6.6.
3 ~ 60
1 s/step
30 s
Adjusts the toner supply rate for fixed toner
supply mode.
This SP is effective only when SP2-921 is
“2” or “3”.
2-925*
Toner Supply Rate
Fixed Mode
Increasing this value increases the toner
supply motor on time. So, use a high value if
the user tends to make lots of copies that
have a high proportion of black. See “Toner
Density Control” for more details, Section
2.6.6.
0: t 4: 12t
1: 2t 5: 16t
2: 4t 6: On continuously
3: 8t 7: 0 s
t: 200 ms
0 ~ 7
1/step
0
Adjusts Vts (Vt for a new PCU). The TD
sensor output is adjusted to this value
during the TD sensor initial setting process.
This SP is effective only when SP2-921 is
“0”, “1”, or “2”.
2-926*
Standard Vt
Do not change this value.
0.00 ~ 5.00
0.01 V/step
2.30 V
Selects whether the ID sensor is used or not
for toner density control.
2-927*
ID Sensor Control
If this value is “0”, dirty background may
occur after the machine has not been used
for a long time.
0: No
1: Yes
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA