Gestetner A265, Руководство по обслуживанию

Страница: 632 / 855

BIT SWITCHES
A265/A267 4-28 SM
System Switch 1E
No FUNCTION COMMENTS
0 Communication after the
Journal data storage area has
become full
0: Impossible
1: Possible
This setting is effective only when Automatic
Journal printout is enabled but the machine
cannot print the report (e.g., no paper).
0: If the buffer memory of the communication
records for the Journal has become full, fax
communications will become impossible, to
prevent overwriting the communication records
before the machine prints them out.
1: If the buffer memory of the communication
records for the Journal is full, fax communications
are still possible. But the machine will overwrite
the oldest communication records.
Cross Reference
Automatic Journal output - User switch 03 bit 7
Number of communication records for the
Journal:
100 records (standard)
900 records (with the EXFUNC board
installed)
1 Action when the SAF memory
has become full during
scanning
0: The current page is erased.
1: The entire file is erased.
0: If the SAF memory becomes full during
scanning, the successfully scanned pages are
transmitted.
1: If the SAF memory becomes full during
scanning, the file is erased and no pages are
transmitted.
This bit switch is ignored for parallel memory
transmission.
2
RTI/CSI display priority
0: RTI 1: CSI This bit determines which identifier, RTI or CSI, is
displayed on the LCD while the machine is
communicating in G3 non-standard mode.
3
File No. printing
0 : Enabled
1 : Disabled
1: File numbers are not printed on any reports.
4
This switch allows or prohibits
all fax reception when
Authorized Reception is
enabled and no RTI/CSI’s
have been programmed.
0: All fax receptions are
enabled.
1: All fax receptions are
disabled.
This switch is only effective when Authorized
Reception is enabled and there are no RTI/CSI’s
programmed.
Under these two conditions:
The default setting of “
0 ” allows the machine to
receive all incoming faxes. This is useful in cases
where the customer has mistakenly enabled
Authorized Reception with no RTI/CSIs
programmed. Setting this switch to “1” will cause
the machine to reject all incoming transmissions.
5 Address display priority in the
AI redial mode
0: RTI/CSI
1: Telephone number
0: When the machine has both RTI/CSI and the
telephone number information, the machine
displays RTI/CSI.
1: The machine always displays the telephone
number.
⇒
Rev. 04/2004
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA