Gestetner A265, Руководство по обслуживанию

Страница: 807 / 855

Print
e
r
Cont
roller
B306
SERVICE TABLES
SM 4-1 A265/A267
4. SERVICE TABLES
4.1 PRECAUTION
Do not turn off the machine, or switch the controller off-line, while the data-in LED
is blinking or lit. Some data that the controller has received for raster image
processing may be lost.
Check with the customer before maintenance to avoid such data loss.
4.2 SERVICE PROGRAM MODE OVERVIEW
4.2.1 HOW TO ENTER THE SP MODE
Entering and exiting SP mode is the same as for copier and fax, as follows.
NOTE: Before using any of the SP modes, disconnect the parallel and Ethernet
cables.
Entering Printer SP mode
"
→
#
→
$
→
%
→
&
(Hold for more than 3 seconds.)
Select “4. Printer”. The Printer SP mode main menu appears.
Exiting SP mode
Select “3. End” from the Printer SP mode main menu, then exit the SP mode
main menu.
4.2.2 SP MODE TABLE
SERVICE MENU
Title Description
A BitSw#1 Set
B BitSw#2 Set
C BitSw#3 Set
D BitSw#4 Set
Adjusts bit switch settings.
Refer to section 4.3.1 for details.
NOTE: The bit switches are not used at the moment.
E NVRAM Clear 1 Initializes the controller NVRAM except bit switches and
log data. The NIB settings on the NIB NVRAM are not
reset.
F NVRAM Clear 2 Initializes the NVRAM on the controller. The NIB settings
on the NIB NVRAM are not reset.
G NVRAM Clear 3 Initializes the NVRAM on the NIB.
H Counter Clear Initializes all counters to zero.
I Diag. Error Displays diagnostics error codes on the LCD.
J Service Print Prints the service summary sheet.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA