Gestetner A265, Руководство по обслуживанию

Страница: 193 / 855

SERVICE PROGRAM MODE
SM 4-5 A265/A267
Serv
ic
e
Ta
b
le
s
4.2.2 SERVICE PROGRAM MODE TABLES
NOTE: 1) In the Function column, comments are in italics .
2) In the Setting column, the default value is in bold letters.
3) An asterisk “*” after the mode number means that this mode is stored in
the NVRAM. If you do a RAM reset, all these SP modes will be return to
their factory settings.
4) SP4-915 to 4-941: When the SP mode name has a prefix of “P-”, the
adjustment is only effective when the user selects an original type of
“Service Mode” (User Tools - General Features - 09. Image
Adjustment).
Mode No.
Class
1 and 2
Class
3
Function Settings
Adjusts the printing leading edge registration
from each paper feed station using the
Trimming Area Pattern (SP5-902, No.10).
1
Leading Edge
Registration
(Paper Tray Feed) +9.0 ~ –9.0
0.1 mm/step
+0.0 mm
2
Leading Edge
Registration
(By-pass Feed) +12.5~–12.5
0.1 mm/step
+0.0 mm
1-001*
3
Leading Edge
Registration
(Duplex)
Use the
!
key to toggle b and -
before entering the value. The specification
is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details,
Section 6.8
+12.5~–12.5
0.1 mm/step
+0.0 mm
Adjusts the printing side-to-side registration
from each paper feed station using the
Trimming Area Pattern (SP5-902, No.10).
1
Side-to-Side
Registration
(1st Paper Feed)
2
Side-to-Side
Registration
(2nd Paper Feed)
3
Side-to-Side
Registration
(3rd Paper Feed:
optional PFU tray 1
or optional LCT)
4
Side-to-Side
Registration
(4th Paper Feed:
optional PFU tray 2)
5
Side-to-Side
Registration
(By-pass Feed)
1-002*
6
Side-to-Side
Registration
(Duplex)
Use the
!
key to toggle b and -
before entering the value. The specification
is 2
±
1.5 mm. See “Replacement and
Adjustment - Copy Adjustment” for details,
Section 6.8.
+9.0 ~ –9.0
0.1 mm/step
+0.0 mm
1-003* 1
Paper Feed Timing
(1st Paper Feed) Adjusts the paper feed clutch timing at
registration. The paper feed clutch timing
determines the amount of paper buckle at
registration. (A larger setting leads to more
buckling.) 0 ~ 10
1 mm/step
5 mm
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA