Gerber Technology GERBERplotter MP Series, Руководство пользователя

Страница: 34 / 184

24
GERBERplotter MP Series User Manual
English
Paper take-up bar
Step 12 of 17
1
Insert the left end of the paper take-up bar (CN009) into the hole
in the left-side panel. The hole is between the inverter and the
fixed wheel.
2
Insert the plastic guide and cable from the paper take-up bar
(CN009) into the opening. The cable should slide to the bottom
of its groove.
3
Place the right end of the paper take-up bar (CN009) on top of the
wheels in the right-side panel.
Install the paper take-up bar in front of the cover.
Having the paper take-up bar free at one end lets you quickly remove a job. To remove a job, cut the paper
and slide the side fastening clips to the side, lift the right side of the paper take-up bar, remove the right
fastening clip, and then slide the job off the take-up bar. To prepare for printing again, advance the paper
by pressing the PAPER button on the plotter keyboard and secure the paper using the two red fastening
clips at the sides and the white holding clip in the center.
1
3
1
3
2
CN009
CN009
12