Instructions for Use
Ergostik
Serial no.: xx|8|201|yyy and 2201xxxxx
Page 66
Version: 7 | Release date: 02. August 2021
Possible danger to life.
Reason: Electric shock. Misdiagnosis caused by
measurement error. For this: Ensure that the used
components are undamaged and that you are working
in a careful way! Therefore:
•
Prior to each use, visually inspect the total
system (housing, connectors, etc.) for any
damages!
•
If there are any damages, do not operate the
system. The damaged parts must be replaced
or repaired properly!
Reason: Electric shock. Triggering malfunctions of
Ergostik. Unqualified user / operator can detect
sources of failures too late or even cause them.
Therefore:
•
All maintenance and servicing work may only be
performed by specialised personnel who have
been authorised by the manufacturer!
8.2.1
Checking / Exchanging of Tubes and Cables
All parts of Ergostik should be checked for visible mechanical
damage (cracks, tears) each day. If damage is ascertained, the
corresponding component must be replaced.
For replacing components see:
•
Chap. 4.1.3 “System Construction and Electrical
•
Chap. 6.2 “Recommissioning after Servicing / Cleaning
Work“
