June 15, 2011
4
4.2.2 Defining ID Numbers of Readers
After GV-R1352 readers are connected to a computer, follow the steps below to define the ID
number of each GV-R1352 reader:
1. Insert the software CD and the Install Program window will pop up automatically.
2. Select Install GeoVision USB Devices Driver.
3. In the GeoVision USB Driver Installer window that appears, select Install.
4. Go back to the Install Program window, and select Run GV-RK1352 Config Utility. This
dialog box appears.
5. Type the barcode number of GV-R1352 in the Serial ID box. The barcode number is on
the rear panel of GV-R1352.
6. Select the COM port that is connected to GV-R1352 and click Open COM. The red
square next to the COM port box should change to blue to indicate the COM port is
correct.
