GeoVision GV-R1352 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 12

GeoVision GV-R1352 Скачать руководство пользователя страница 2

June 15, 2011

2

3. LED Indicator and Beeper

In standby mode, the LED is blue. When a card is read, the LED flashes green and the

beeper beeps once.

GV-R1352 comes with the external control wires of Green LED, Red LED and Beeper. When

these control wires are connected to GV-AS Controller, the status of LED and Beeper can be

defined by GV-AS Controller. For details on how to configure the settings, refer to

6.Configuring the Beeper and LED Indicator later in this installation guide.

4. Connecting GV-R1352 to GV-AS Controller

GV-R1352 is compatible with GV-AS100/110/120/400 Controllers, but the connection

between GV-R1352 and the controller varies with different controller models. The following

diagrams illustrate how to connect GV-R1352 to GV-AS400 Controller through Wiegand or

RS-485 interface.

4.1 Connecting through Wiegand Interface

Up to eight GV-R1352 readers can be connected to GV-AS400 Controller through the

controller’s Wiegand interface.

W

ie

g

a

n

d

A

Wire Color Function

Black

GND

Green

Wiegand Data 0

White

Wiegand Data 1

Red

DC 12V

«
1
2
3
4
...
»

Содержание GV-R1352













Отзывы:

Нет отзывов