June 15, 2011
10
6.3 Configuring the Beeper and LED Settings for Each Door/Gate
After connecting the wires for Beeper or LED, specify the Beeper or LED settings for each
door/gate on the GV-AS Web interface. Here we use GV-AS400 Controller as example.
1. On the GV-AS400 Web interface, click Output Setting. The page below appears.
2. From outputs 9~12, select a door and select Beeper, Green LED, Red LED or Invert
Red LED. Click Submit.
Beeper: Enables the external control of Beeper.
Green LED: Changes the standby color to blue. When a card is read, the LED
flashes green.
RED LED: Changes the standby color to red. When a card is read, the LED flashes
blue.
Invert Red LED: Changes the standby color to blue. When a card is read, the LED
flashes red.
