GeoVision GV-R1352 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 12

GeoVision GV-R1352 Скачать руководство пользователя страница 11

June 15, 2011

11

7. Firmware Upgrade

GeoVision will periodically release the updated firmware on the website. The new firmware

can be simply loaded into GV-R1352 by using Update Utility

included in the Software CD.

Important Notes before You Start

Before you start updating the firmware, please read these important notes:

1. While the firmware is being updated, the power supply must not be interrupted.

2. Do not turn the power off within 10 minutes after the firmware is updated.

WARNING: The interruption of power supply during updating causes not only update

failures but also damages to the device. In this case, please contact your sales

representative and send your device back to GeoVision for repair.

To upgrade firmware:

1. Insert the Software CD, and select Run Firmware Update Utility. This dialog box

appears.

2. Select the COM port of GV-R1352.

3. Click the Browse button to locate the firmware file (.img) saved at your local computer.

4. Click Update.

5. The LED indicator should flash purple during the process of firmware upgrading. When

the process is complete, GV-R1352 will be sounded twice and the LED indicator will

change to green.

«
...
9
10
11
12
»

Содержание GV-R1352













Отзывы:

Нет отзывов