GeoVision GV-PTZ010D Скачать руководство пользователя страница 87

Страница: 87 / 257

[Audio In Source]

Note this function is only available in

GV-PTZ010D

which contain a built-in microphone and also allow you to install an external
microphone.

Built-in Microphone:

Enable the built-in microphone to record

sounds. By default the option is enabled.

External Microphone:

Enable the externally connected microphone

to record sounds.

[TV Out]

Note this function is only available for the camera with TV-out

connector. Select the signal format of the Video Output on the camera as
either NTSC or PAL.

[Audio Settings] Enable Noise Reduction

to reduce the background

noise in the audio file. All H.265 cameras applying firmware V1.02 or later
support this function.

[LED Control]

Note this function is not available for

GV-PTZ010D

Ready LED:

Select

Disable

if you do not wish to use the Status LED.

LAN LED, WAN LED, Monitoring LED:

Note this option is only

available in

Advanced Cube Camera

. Select

Disable

if you do not

wish to use the LEDs. For details on LED status, see

Overview

in the

corresponding

Hardware Manual

Alarm LED:

Sets the

white illumination LED

Advanced Cube

Camera

The LED is enabled by default.

Auto:

Select

Auto

for the white illumination LED to illuminate the

scene automatically when the PIR sensor detects any motion
within 5 meters.

Содержание GV-PTZ010D


































































































































































































































































Результаты поиска

Содержание GV-PTZ010D

Отзывы:

GeoVision GV-PTZ010D, Руководство по прошивке, Страница: 87 / 257

Результаты поиска

Содержание GV-PTZ010D

Отзывы: