GeoVision GV-PTZ010D, Руководство по прошивке, Страница: 189 / 257

168
Chapter 5 Recording and Playback
Note that Recording and Playback function is not available for Target
Series .
The camera can record video and audio directly to the memory card. You
can play back the recorded files on the GV-DVR / NVR / VMS over the
TCP/IP network.
Note: See Note for Recording at the beginning of the manual.
5.1 Recording
To enable the recording function:
1. Insert the memory card to the camera. See “To add a memory card”,
4.9.2 Storage Settings .
2. If you like to set up the pre-recording, post-recording or audio
recording, see 4.1.1 Video Settings .
3. If you like to set up the schedule for video recording or I/O monitoring,
see 4.6 Recording Schedule .
4. If you like to configure the areas and sensitivity values for motion
detection, see 4.1.2 Motion Detection .
5. If you want the recording to be triggered by input device, configure the
operation of input device. See 4.3.1 Input Settings .
6. To start recording and I/O monitoring, see 4.5 Monitoring .
The camera will start recording in case of motion detection, I/O trigger, or
during the scheduled time.