GeoVision GV-PTZ010D Скачать руководство пользователя страница 181

Страница: 181 / 257

160

[Disk Information]

Note this function is not supported for

Target Series

. This section shows

the details of the attached storage device. Use the

Format

Remove

button

to format or unload a storage device. For detail steps, see

Partition

Information

below.

[Partition Information]

Note this function is not supported for

Target Series

. This section shows

the partition details of the attached storage device.

To add a storage device:
1.

Insert the storage device to the camera.

2. Click

the

Format

button.

After the format is complete, the partition information will display. The
maximum space for one partition is 200

GB.

To remove a storage device:

1. Click

the

Remove

button.

2. When you are prompted to ensure the action, click

Yes

. The page will

be refreshed and the partition information will be cleaned.

Remove the storage device from the camera.

The storage device status is indicated in the status column:

Status

Description

Formatting

The storage device is being formatted.

Unknown

The camera can not recognize the format of the
storage device or the device can not be found.

Storage formatting is successful.

Try Mount

The camera is attempting to connect to the storage
device.

Error File System

There is a recording error in the storage device. All
the recording data is inaccessible under the status.

Содержание GV-PTZ010D


































































































































































































































































Результаты поиска

Содержание GV-PTZ010D

Отзывы:

GeoVision GV-PTZ010D, Руководство по прошивке, Страница: 181 / 257

Результаты поиска

Содержание GV-PTZ010D

Отзывы: