GeoVision GV-PTZ010D Скачать руководство пользователя страница 151 | Manualshive

Страница: 151 / 257

GeoVision GV-PTZ010D Скачать руководство пользователя страница 151

130

Input:

Note this function is only supported by cameras with I/O

function. Manually starts I/O monitoring. When the sensor input is
triggered, its associated camera and output will be activated for
recording and alerting. For this setting, see

4.3.1 Input Setting.

[Schedule]

The system starts motion detection and I/O monitoring

according to the schedule you have set. For schedule settings, see

4.6

Recording Schedule

.

[Camera Status Icon]

:

On standby

: Enabled for motion detection and input trigger

: Recording is on.

[Recording Settings]

Note this function is only supported by

GV-BX12201

firmware V1.02 or later and

GV-IPCAM H.265

. Configure recording

settings for motion and I/O events, and the condition to record.

Pre-alarm recording time

: Activates video recording before an event

occurs. Set the recording time to 1 or 2 seconds. The recording is saved in
the buffer of the camera.

Post-alarm recording time

: Activates video recording onto the

inserted memory card after an event occurs. Set the recording time
from 1 to 30 seconds.

Split-interval

: Sets the time length between each event file from 1 to

5 minutes.

«
...
149
150
151
152
153
...
»

Содержание GV-PTZ010D


































































































































































































































































Отзывы:

Нет отзывов