GeoVision GV-PTZ010D Скачать руководство пользователя страница 177

Страница: 177 / 257

156

[Storage Settings]

Name:

Type the name of the storage device. The name can only

contain English letters (of upper or lower cases), numerals, slashes,
and hyphens.

Note:

The setting of the device name is for GV-NAS System only.

Enable recycling:

Enable recycling

is selected, when the space of

the storage device is lower than the specified space, the system will
overwrite the oldest recorded files. If

Enable recycling

is not selected,

the system will stop recording when the specified space is reached.

Keep days (1-254):

Select the number of days to keep the files from

day to

254

days. When both

Keep days

and

Enable recycling

are

selected, the system applies whichever condition comes first. For
example, if the specified smallest amount of storage space comes
earlier than the designated keep days, then recycle is applied first.

Enable debug message to the storage:

Note this function is not

supported for

Target Series

. Debug message (see

4.9.4 Log

Information

) is deleted after reboot. Select this option to store log

information to an inserted storage device.

Enable auto formatting when disk or partition is enabled to
record:

Note this function is not supported for

Target Series

. Select

this option for the camera to automatically format the storage device
when there is error during recording.

[Network Neighborhood Settings]

You can record to a connected NAS server.

Содержание GV-PTZ010D


































































































































































































































































Результаты поиска

Содержание GV-PTZ010D

Отзывы:

GeoVision GV-PTZ010D, Руководство по прошивке, Страница: 177 / 257

Результаты поиска

Содержание GV-PTZ010D

Отзывы: