GeoVision GV-PTZ010D Скачать руководство пользователя страница 146

Страница: 146 / 257

Administrator Mode

125

[RTSP]

Activate Link:

Enable the RTSP service.

RTSP/TCP Port:

Keep the default value 8554,

or modify it if

necessary.

RTP/UDP Port:

Keep the default range from 17300 to 17319, or

modify it if necessary. The number of ports for use is limited to 20.

Max Connection:

Select the maximum number of RTSP and 3GPP

connections to the camera. The maximum value is 8.

Enable Audio:

Note this function is not available for

Target Bullet

Camera

Target Mini Fixed Rugged Dome

and

Ultra Bullet Camera

Turns audio streaming on or off.

Disable Authentication:

By default, when accessing live view

through RTSP command, the ID and password of the camera are
required. Select this option to disable the authentication prompt.

[Streaming 1/2]

Set up the Multicast function over RTSP.

Note:

This function is only for Target cameras firmware V1.09 or later.

For details on remote monitoring with mobile phones, see

Mobile Phone

Connection, Chapter 26

. For RTSP command, see

Appendix B

Содержание GV-PTZ010D


































































































































































































































































Результаты поиска

Содержание GV-PTZ010D

Отзывы:

GeoVision GV-PTZ010D, Руководство по прошивке, Страница: 146 / 257

Результаты поиска

Содержание GV-PTZ010D

Отзывы: