48
3.2 Setting up PTZ Cameras
After installing PTZ cameras, follow the steps below to set up the camera’s number, type,
baud rate and PTZ ID through the Keyboard.
Figure 3-3
1. Press
, and type the default password “
0000
” to unlock the Keyboard.
2. Press
P4
, and press
,
or numeric buttons to select a PTZ camera, and press
.
3. Press
or
to set up a
PTZ Type
, and press
.
4. Press
or
to set up
Baud Rate
, and press
.
5. Press
,
or numeric buttons to set up the
PTZ ID
, and press
.
6. After the above settings, you can press
P2
and press
or
to select a PTZ
camera that you want to control. Alternatively, you can press
P2
, enter a two-digit
number and press
OK
to select a PTZ camera.
7. To bring up the OSD menu, press
. To close the OSD menu, press the
Cancel
button.
Note:
1. The number of preset points supported varies among the PTZ models.
2. It will not work to press two buttons together to control a PTZ camera.
3. Function Keys (F1 to F8) on the Keyboard are not supported in the direct connection to
PTZ cameras.