GV-Control Center
37
2
2.3.4 Installing USB Drivers
It is required to install the USB driver for the USB connection. For details, see
1.3.4 Installing
USB Drivers.
2.3.5 Running the Keyboard Controller
To control the Keyboard, you need to run the
mcamctrl.exe
program always at the
background. Follow the steps below.
1. Run
mcamctrl.exe
from the GV-Control Center folder.
Figure 2-6
2. The Keyboard & Joystick dialog box appears.
Figure 2-7
3. Configure the Keyboard & Joystick dialog box.
A. At the top left, select
CMS
for GV-Control Center.
B. Choose an ID number.
C. Name the GV-Control Center. The name will be displayed on the Keyboard.
D. Select the COM port that the Keyboard is connected to. For the COM port
information, see step 5 in
1.3.4 Installing USB Drivers
.
