
PTZ Camera
73
5
5.8.5 Preset Settings
For PTZ Camera to automatically move toward a point in live view,
establish a Preset. A Preset is a point in live view that can be configured
and saved for future use. The PTZ Camera allows up to
256
Preset points.
For details on the maximum number of Preset points, see
5.8.3 PTZ
Camera Settings
.
Configuring a Preset Point
To configure a Preset point:
1
Use one of the
Pan / Tilt Control
buttons (No. 2, Figure 5-15) to
move the camera to a desired point in live view.
2
To save this Preset point, click the
Option
button (No. 6, Figure 5-15),
select
Preset Set
and select the desired Preset number
3
A confirmation message appears. Click
Yes
.
4
To configure more Preset points, repeat steps 1 to 3 and select a
different Preset number to save.
Содержание GV-BL110D
