
Box Camera
17
2
2.4.2 GV-BX120D / 130D Series / 220D Series /
320D Series / 520D-0
Figure 2-4
1.
Plug the iris control cable to the Auto Iris Connector on the camera.
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker and an external microphone.
4.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the
TV Out
field on the
Web interface. See
12.1.1 Video Settings
.
5.
Optionally connect to input / output devices or an infrared illuminator.
For details, see
2.6.2 Infrared Illuminator
and
2.7 I/O Terminal Block
.
6.
Connect power using one of the following methods:
•
plugging the supplied power adapter to the power port.
•
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7.
The status LED of the camera will be on. Then you can set the IP
address for the unit. See
10.1. Assigning an IP Address
.
Содержание GV-BL110D
