
260
15.1.1 Customizing IP Camera Settings
After the IP camera is connected and assigned with a display position, you
can configure the camera’s settings such as frame rate, codec type and
resolution. Right-click the desired camera to see the following list of options:
Figure 15-6
Change Resolution:
Changes the display ratio, live view resolution
and record resolution
Network Time Out:
When network disconnection exceeds the
specified time period, the camera status will be displayed as
Connection Lost.
Change Live View Codec:
Changes the live view codec.
Change Record Codec:
Changes the recording codec.
Live-view frame rate control (Sub stream):
Sets the live view frame
rate of the sub stream to help reduce the CPU usage. If you have set
the live view codec to be
JPEG
, select the number of frames to allow
in a second. If the live view codec selected is
MPEG4
or
H.264
, select
one of the following options:
~
Maximum Live-view Frame Rate:
View the video at the
maximum frame rate possible.
Содержание GV-BL110D
