
16
1.
If you are using the varifocal lens model, plug the iris control cable to
the Auto Iris Connector on the camera.
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker and an external microphone.
4.
Optionally connect a monitor using an RCA video-out wire. Enable
this function by selecting your signal format at the
TV Out
field on the
Web interface. See
12.1.1 Video Settings
.
5.
Connect power using one of the following methods:
•
plugging the supplied power adapter to the DC jack.
•
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
6.
Optionally connect to input / output devices or an infrared illuminator.
For details, see
2.6.2 Infrared Illuminator
and
2.7 I/O Terminal Block
.
7.
The status LED of the camera will be red. Then you can set the IP
address for the unit. See
10.1. Assigning an IP Address
.
Содержание GV-BL110D
