
134
10.2 Adjusting Image Clarity
Note the procedures described in this section only apply to Box Camera,
GV-MFD110, Bullet Camera, PT Camera, Vandal Proof IP Dome and
Fixed IP Dome. To adjust focus of a PTZ camera, refer to
5.6 Focus
Adjustment
; for Cube Camera, refer to Camera Adjustment in
11.2.2 The
Control Panel on the Live View Window
.
After you have connected your GV-IPCAM H.264 to the network, follow the
steps below to adjust for image clarity.
1.
Make sure you have installed the latest GV-IP Device Utility program
included on the
GV-IPCAM H.264 Software CD
.
Note:
The PC installed with GV-IP Device Utility must be under the
same LAN with the GV-IPCAM H.264 you wish to configure.
2.
On the GV-IP Utility window, click the
button to search for the IP
devices connected in the same LAN. Click the IP Address of the
camera you desire. A drop-down list appears.
Figure 10-2
Содержание GV-BL110D
