GeoVision GV-BL110D, Руководство пользователя, Страница: 203 / 393

Administrator Mode
185
12
„
Normal State: You can set the input state to trigger actions by
selecting Open Circuit (N/O) or Grounded Circuit (N/C) .
„
Latch Mode: Enable this option to have a momentary output alarm.
„
Trigger digital output relay: When this option is enabled, the output
will be triggered once the input is activated.
„
Record: Enable this option to start recording when the input is
triggered.
„
Send Video to Center V2: Enable this option to send the images to
Center V2 when the input is triggered.
„
PTZ Settings: Note this function is only available for PTZ Camera
and PT Camera .

Input On: Select a preset point to which the camera turns when an
input is triggered.

Input Off: Select a preset point to which the camera returns when
the input triggering is off.

Duration to set preset after input off: Specify the duration that
the camera stays at the Input On point before returning to the Input
Off point.
Note:
1. Only GV-BX110D supports the wet-contact input device
(7V~30V). Other cameras all support dry-contact input device.
2. The functions “triggering the output”, “starting the recording when
the input is triggered” and “sending video to Center V2” only work
after you start
Input monitoring manually or by schedule. To
configure the input monitoring, see 12.4 Monitoring.