Geotech Shallow Well Probe Scavenger, Инструкция по установке и эксплуатации

Страница: 15 / 32

13
Section 4: System Maintenance
The SWPS pump/motor and control electronics are factory sealed and require no maintenance. The only
regular maintenance required is periodic cleaning of the system probes. Every week, or more often as
necessary, rinse both probes in clean fuel and/or hot water. This procedure will prevent fouling of the probes
and sticking of the floats. Also while the intake is out of the well, check to ensure no accumulation of debris has
occurred on the intake strainer and verify there are no obstructive kinks or holes in the intake and output
hoses.