Basic Operations
37
Restoring WinCE System
Make sure the backup of software and data have been done before restoring WinCE system.
In the power off status, keep pressing the “ENT” button and press the power button, then
the handheld will turn on and the interface of “Restoring the system,
please wait…” will be
shown as below.
This operation will restore all data and settings to the initial status of handheld except
Micro SD. Please note: the software GPac will be deleted. Reinstallation is required to
perform any field work.
Warning:
To avoid data lost, please do not try this operation if it’s not necessary. Make sure
the backup of software and data have been done before this operation.
Installing, Uninstalling or Updating GPac Software
For details, please refer to the
GPac User’s Manual
.
Upgrading the Firmware
Method 1:
1.
Connect R2 series to PC with data cable. For details, please refer to chapter:
