eFix R2 Series Hardware Operating Instructions
24
power. If the remaining power shown in
Main batteries
area is 100%, but on the task bar,
the battery icon is along with a lightning signal, then it means the battery is not yet fully
charged, as shown below left. If the charging is stopped at this time, the remaining power
(shown in this dialog box) may be reduced to 85%.
Only when the power part shown in
Main batteries
area is as
Good
and 100%, the battery is
really fully charged, as shown below right.
Note:
This is because the charging voltage detected by WinCE is a little higher than the real
battery voltage. Constant pressure charging is important for full charging. Please complete
the whole charging process to ensure the working time.
Power Saving Mode
In default condition, screen backlighting will be turned off automatically if no operation
(press keys or tap touch screen) has been carried out within 1 minute. The system will enter
the standby mode if no operation has been carried out within 30 minutes, or be power off if
no operation within 2 hours.
