GeoSmart NETZERO BW B B, Техническое и сервисное руководство, Страница: 19 / 64

Installer manual NETZERO
GEOSMART ENERGY 19
EN
2. Controller Technical Service Guide
To access the installer menu, press at the same time. Afterwards, enter access password PW1. This menu is used to define
the type of installation and the services the heat pump will deal with, to adjust the various operation parameters and protections as
well as to carry out various start-up and maintenance operations.
This menu shows the sub-menu structure of the INSTALLER menu.
INSTALLER menu
Sub-menu level 1 Sub-menu level 2 Sub-menu level 3
1. Language
2. Configuration
2.1. Heat pump model
2.2 Source
2.3. Services
2.3.1. Heating
2.3.2. Cooling
2.3.3. DHW
2.3.4. Pool
2.3.5. Priorities
2.3.6. Special programs
2.4. e-Manager
2.5. Auxiliary equipment
2.4.1. Bivalent parameters
2.4.2. Internal resistor
2.4.3. DHW resistor
2.4.4. Buffer resistor
2.4.5. Boiler
2.6 Remote control 2.5.1. EVU/SG control
2.5.2. Services control
2.5.3. BUS control
2.7. Protections
2.8. Probe Conf
3. Information
4. Manual activation
5. Alarm log
6. Default values
7. Change password
Table 2.1.
INSTALLER menu structure.
2.1. Language selection
Language
1. Used to select the language of the heat pump controller.
Installer menu 1/7
a.Change language
b.Configuration
c.Information
Language
Language: ENGLISH
ENTER to change