GeoSmart NETZERO BW B B, Техническое и сервисное руководство, Страница: 18 / 64

Installer manual NETZERO
GEOSMART ENERGY 18
EN
Month/Year maximeters
Used to display for each month and annually the maximum power consumed from the
electrical network.
Month/year coverage
Used to display for each month and annually the ratio of the thermal energy produced in
surplus control.
Active demands
The upper part shows current demands for compressor start-up.
The bottom part shows the demands received by the heat pump to start the various outlet
units.
Active demands for the compressor or the outlet units do not imply that they will switch
on. There may be other reasons that prevent them from starting up.
Version
This shows information about the application installed in the controller.
1.17. ALARMS Menu
Press for quick access to the information menu from the main screen.
Active alarms
These screens display the alarms that are active and do not allow compressor start-up. The
button stays on.
Reset alarms
The heat pump is blocked and switches to EMERGENCY mode when a critical alarm goes
off more than 5 times a day. In these cases, the heat pump can be unblocked from this
screen once the problem has been solved.
Month/Year maximeters
SEPTEMBER
Consumption: 2.1kW
Month/Year coverage
SEPTEMBER
Production:
Surplus: 38%
Active demands
Version
Version: 0.1.005B
Date: 02/10/15
Bios: 6.24 25/02/14
Boot: 4.05 04/02/13
Version firmw: 5.0
Firware version: 0.2
User menu 8/8
Pool
Information
Alarms
Alarms
Brine low pressure
Reset alarms
Reset alarms: