GeoSmart NETZERO BW B B, Техническое и сервисное руководство, Страница: 16 / 64

Installer manual NETZERO
GEOSMART ENERGY 16
EN
Enable consumption control
Used to enable electrical consumption control.
Used to adjust the general maximum consumption value of the electrical installation
through the heat pump power control.
1.16. INFORMATION Menu
Press for quick access to the information menu from the main screen.
Source/Production
This shows the inlet and return temperatures, temperature difference, current pressure
and the percentage of circulator pump regulation in the source and production circuits or
shows the simultaneous production valves regulation value.
Boiler
Shows whether the boiler is On or Off, the current temperature in the support with boiler
sensor and the regulation percentage of the boiler or the mixing valve.
Outdoor temperature
Shows the current outdoor temperature and the outside temperatures for heating and
cooling cut-off.
Interior terminals
In installations with interior terminals equipped with bus communication (Th-T or TH
sensors), it displays the interior setpoint temperature (Tcons), the current temperature
(Treal) and the current relative humidity (HR) of the terminals assigned to each outlet unit.
Heating buffer / Cooling buffer
This shows the setpoint temperature, the start-up temperature differential and the current
temperature of the buffer storage tank.
There are separate screens for the heating and cooling buffer storage tanks.
Heating units / Cooling units
This shows the target outlet temperature (Tcons), the current outlet temperature (Treal)
and the regulation percentage (Reg) of each outlet unit.
There are separate screens for the heating and cooling outlet units.
DHW Tank
This shows the setpoint temperature, the start-up temperature differential and the current
temperature of the DHW storage tank.
Consumption control
Enable:
Consump. limit: 3.0kW
User menu 7/8
Pool
Information
Alarms
Brine/Production
Brine Heat.
Outlet: 2.0 35.1 ºC
Inlet: 5.1 29.9 ºC
DT: 3.1 5.2 ºC
Press: 1.2 1.4 bar
Pumps: 95.0 87.0 %
Boiler
State Off
RealT: 40.0ºC
Regulation: 100%
Outdoor temperature
OutdoorT: 14.7ºC
Outdoor StopT
Heating:
21.0ºC
Active cool.: 28.0ºC
Passive cool.: 23.0ºC
Room terminals
SetT RealT RH
ºC ºC %
T1: 50.0 49.8 23.2
T2: 45.0 46.2 10.1
T3: 45.0 43.0 23.2
T4: 35.0 35.1 94.6
XXXXXX buffer tank
RealT: 49.9ºC
SetT 50.0ºC
DTstart: 5.0ºC
XXXXXX groups
SetT RealT Reg
ºC ºC %
DG1: 50.0 49.8
SG2: 45.0 46.2 10.1
SG3: 45.0 43.0 23.2
SG4: 35.0 35.1 94.6
DHW
RealT: 47.9ºC
SetT: 48.0ºC
DTstart: 5.0ºC
Start comp .T: 43.0ºC