background image

50

Conditional Access

Conditional Access

The card is loaded with a 4-digit code, a so-called PIN code (Personal Identification
Number). Normally the PIN code is ‘0000’ or ‘1234’. The PIN code is necessary for the
future extra service offered by the service provider.

ҫ

ҫ

Note : 1. Insert the CAM fully into the slot so that the arrow marked on the CAM faces upwards

and inwards.

2. Insert the smart card fully into the CAM so that the micro chip (gold color) faces upwards

and inwards.

͉

The message of ‘CAM Initializing’ will appear on the screen.

͊

After the message ‘CAM Initializing’ has disappeared, you can select the channel
you want.

To receive pay-TV channels you need a CA Module and a Smart card from the service
provider (program distributor) of your preference. If you are subscribing to services from
more than one service provider, you need to change different smart card or even different
CA Modules.
Since a smart card is connected to a single service provider, a limited range of channels will
be available. Without the CA Module and the smart card, you can watch only ‘Free-to-Air’
programs.

ҫ

PIN-Code

8.1

With a DVB COMMON INTERFACE compatible CAM (Conditional Access Module) and a
Smart card, you can receive relevant scrambled channels and/or encrypted channels.
Viaccess, Conax, Cryptoworks, Nagravision,  Irdeto and Mediaguard encryption platforms
are compatible with DVB CI.

͈

Insert a CAM into one slot of your receiver.(You can insert two CAMs at the same time)

8.2

8.3

You can check the status of CAM and smart card inserted in their slots.

͈

Press MENU key.

͉

Press 

or

,  and select the Common Interface you want, then press 

͊

Brief information on selected CAM will be displayed. 

͋

If you want detailed information on the selected CAM select slot number 1 or slot
number 2 with 

or

and press 

.

͌

Proceed with further instructions displayed on the screen, depending on the CAMs in
use.

ҫ

ҫ

Note : Further detailed information is not mentioned in this manual since the information depends

on CAM and smart cards.

CH

CH

CH

CH

8.2

Conditional Access

51

Conditional Access

Содержание DVR 1000ci































Отзывы: