ҫ
ҫ
Note : 1. You can check local time, channel name, and other brief information on the current
program.
2. If you didn't set local time under ‘System Parameters’ section, the GUIDE function may
not work properly.
3. EPG information is delivered by Satellite from service providers. If the channel does not
carry any signal on the guide data, this function may not work properly.
͉
Select Channel with
or
. Then you can see current or next program
information of the selected channel.
͊
If you press GREEN, current or next program information would be converted to next or
current program information respectively.
CH
CH
6.7
1. TV / RADIO switching
You can use this menu when you change a TV channel to a Radio channel or vice versa.
͈
Press ‘TV/RADIO’.
͉
When listening a radio channel, ‘r 001’ will be displayed on the front panel.
2. GUIDE(EPG:Electronic Program Guide)
You can check the channel information on the channels of the transponder you are
watching.
͈
Press GUIDE key, then the following menu will be displayed.
Operations
37
Operations
36
Operations
Operations
6.7
͋
If you press YELLOW, you can see program schedule list of the selected channel.
͌
If you want to see program information of a program in the program schedule list, select
the program with
or
.
Then you can see the program information in the right window.
CH
CH
͍
If you press BLUE, you can see extended program information of the selected
program.
͎
You can set up automatic power on-off (Timer) or automatic recording on the
program schedule list. After press YELLOW in the Guide(EPG) menu, select a program
with /
or
/
and
press .
͏
Select ‘Once/Daily/Weekly/No' of ‘Status' with or .
͐
Select ‘HD record’ and set ‘ON’ with if you want to record automatically.
VOL
VOL
VOL
VOL
CH
CH
